Best Bitcoin Hardware Miners

Bitcoin Hardware Miners

Last Updated on May 1, 2021 by Daniel

Mining bitcoins apart from being very profitable requires lots of power and an in-depth understanding of blockchain technology. To successfully mine bitcoins, you’ll need a specialized bitcoin hardware miner or sometimes referred to as ASICs. Although there are lots of bitcoin hardware miners available in the market today, however, to get the best bitcoin miner can be a hustle.

So, if you’re looking for the best bitcoin hardware miners to buy, We’ve listed below the 10 best bitcoin mining machines money can buy.

List of the Best Bitcoin Hardware Miner

Products Features Where to Buy
Bitmain AntMiner S5

bitmain Antminer s5 Bitcoin Hardware Miners

  • Hash rate: 1 GH/s | Voltage: 560W
Get it on Amazon
Bitmain AntMiner S7

Bitmain antminer Bitcoin Hardware Miners

  • Hash rate: N/A | Voltage: 1600W
Get it on Amazon
Bitmain AntMiner S9

bitcoin miner s9 Bitcoin Hardware Miners

  • Hash rate: 14 TH/s | Voltage: 1600W
Get it on Amazon
AntMiner T9

antminer t9 Bitcoin Hardware Miners

  • Hash rate: 11.5 TH/s | Voltage: 1450W
Get it on Amazon
AvalonMiner 741

avalonminer Bitcoin Hardware Miners

  • Hash rate: 7.3 TH/s | Voltage: 0.16J/GH
Get it on Amazon
Bitmain AntMiner L3+

antminer l3+

  • Hash rate: 504 MH/s | Voltage: 800W
Get it on Amazon
Bitmain AntMiner D3

antminer bitcoin

  • Hash rate: 19.3 GH/s | Voltage: 1350W
Get it on Amazon
Dragonmint T1

bitcoin miner t1

  • Hash rate: 19.3 GH/s | Voltage: 1350W
Get it on Amazon
WhatsMiner M3X

whatsminer bitcoin

  • Hash rate: 12-13 TH/s | Voltage: 180-240V
Get it on Amazon
Avalon6

Avalon6 bitcoin miner

  • Hash rate: 3.5 TH/s | Voltage: N/A
Get it on Amazon

Buyers Guide: What to Consider When Selecting Bitcoin Hardware Miner

Price: The cost of Bitcoin mining equipment changes dependent on operational effectiveness, strength, and computational force. Generally speaking, less expensive equipment will convey lower proficiency and lower benefit. The expense of mining equipment ought to be joined into any benefit analysis, considering the normal life expectancy of the equipment.

Efficiency: Bitcoin mining equipment is basically intended to change overpower into BTC. In case you don’t know how to pick the best Bitcoin mining equipment, zeroing in on energy productivity is the best spot to begin.

Hash Rate: Hash Rate is the rate at which Bitcoin mining equipment can make escalated numerical tasks. In straightforward terms, the higher the hash pace of the equipment, the almost certain it is that the digger or digging pool for which the equipment is working will address the following square in the Bitcoin blockchain. Generally speaking, higher hash rate equipment is more costly.

Generally speaking, the best Bitcoin ASIC is the most expense-effective, most beneficial ASIC. The improvement of ASIC gadgets has quickened quickly throughout the most recent decade, with new equipment delivered on a yearly premise that frequently delivers more seasoned equipment out of date.

Bitmain AntMiner S5

bitmain Antminer s5 Bitcoin Hardware Miners

Hash rate: 1 GH/s | Voltage: 560W

The Bitmain Antminer S5 isn’t the most recent contribution from the Beijing-based ASIC maker, yet offers magnificent benefits for cash and productivity. Not at all like later models, for example, the S7 and S9, the AntMiner S5 works a lower power supply of 115 volts, drawing a normal of 560 Watts.

The low power necessities of the S5 makes it an ideal section level Bitcoin mining ASIC that is equipped for giving amazing operational productivity. The S5 creates a hash pace of around 1 GH/s for each 0.51 Watts, which compares to 0.51 J/GH. The S5 is reasonable for both leisure activity diggers and passage level home mining tasks, with the additional advantage of a low weight profile at just shy of 2.5KG.

Pros Cons
Lightweight Expensive
Fast hash pace

Bitmain AntMiner S7

Bitmain antminer Bitcoin Hardware Miners

Hash rate: N/A | Voltage: 1600W

The Bitmain AntMiner S7 is another more seasoned model from Bitmain’s exceptionally famous line of ASIC units however stays quite possibly the most mainstream gadgets online today. Offering lower power utilization than the S5, the S7 is far-reaching all through China-based Bitcoin mining homesteads and flaunts amazing flexibility when utilized in blend with a vigorous power supply, for example, the 1600 watt APW3.

While the S7 conveys sensible benefit depending on power costs, the productivity of the unit relies upon both the power supply utilized and surrounding temperature — the S7 is especially delicate to conditions hotter than 27 degrees Celsius. Generally, the S7 is generally appropriate for diggers situated in cooler environments, as cooling expenses can altogether cut into productivity in hotter areas.

Pros Cons
Low power consumption Works well in cold environment only
Easy to install

Bitmain AntMiner S9

bitcoin miner s9 Bitcoin Hardware Miners

Hash rate: 14 TH/s | Voltage: 1600W

The Bitmain AntMiner, broadly promoted as the most proficient and most remarkable Bitcoin miner available, offers diggers a profoundly noteworthy hash pace of 14 TH/s at a shockingly low power draw. The high hash power of the S9 is conveyed by a threesome of sheets, which include 189 boats between them.

Joined with an Antminer 1600 Watt supply, the S9 output double the productivity of the S7 at 0.1 Joules per Gigahash with a draw of only 300 Watts more than the past model. A critical drawback of the S9 is the uproarious operational volume — the S9 is unacceptable for home applications, as the solid 4.7KG edge has the inclination to amplify operational noise.

Pros Cons
Power-efficient Noisey
Quick hash pace

AntMiner T9

antminer t9 Bitcoin Hardware Miners

Hash rate: 11.5 TH/s | Voltage: 1450W

Delivered in August 2017, the AntMiner T9 stays perhaps the most remarkable ASIC units accessible available today — just as quite possibly the most costly. The T9 is habitually contrasted with the S9 regarding execution and effectiveness yet contains some outstanding upgrades in chip quality that improve equipment solidness.

Later cluster AntMiner T9’s burn-through around 1450 watts, conveying roughly 11.5 TH/s and a proficiency pace of 0.126 J/GH. Productivity examination dependent on execution alone places the T9 beneath the S9 as far as benefit, yet dependability upgrades settle on the T9 a more solid decision for more limited size mining activities.

Pros Cons
Durable Pricey
High proficiency pace

AvalonMiner 741

avalonminer

Hash rate: 7.3 TH/s | Voltage: 0.16J/GH

The AvalonMiner 741, delivered in April 2017, gives side interest and a more limited size Bitcoin miner with a sensibly amazing excavator at a moderate cost. Produced by Canaan, the 741 is a huge overhaul over the earlier Avalon 721 model, coordinating another cooling plan and a more grounded chipset.

The Avalon 741 accompanies 88 chips and another cooling component that upgrades the effectiveness of wind stream inside the gadget, close by double heatsinks mounted around the PCB. Canaan’s 2017 741 excavator conveys a hash pace of 7.3 TH/s, with an energy effectiveness pace of 0.16 J/GH — definitely more productive than other ASIC units in a similar value range.

Pros Cons
Affordable none found
Energy efficient

Bitmain AntMiner L3+

antminer l3+

Hash rate: 504 MH/s | Voltage: 800W

Bitmain’s L3+ is perhaps the most mainstream ASIC units on the planet for Scrypt excavators and is centered exclusively around mining this specific calculation. The L3+ depends on the BM1485 chip, which gives huge upgrades over the chipset utilized in the past L3 model — multiplying the hash rate and power draw of the L3.

The L3 gives a hash pace of 504 MH/s, with a power utilization of 800W. Running a higher hash rate with the L3+ brings about genuine power draw, however the lower value purpose of the gadget contrasted with more costly models, for example, the Innosilicon LTCMaster makes the L3+ the best bitcoin miner for Scrypt.

Pros Cons
Higher hash rate Expensive
Easy to use

Bitmain AntMiner D3

antminer bitcoin

Hash rate: 19.3 GH/s | Voltage: 1350W

The Bitmain Antminer D3 is the forerunner to Bitmain’s 2018 D5 ASIC, yet is an exceptionally well-known gadget for excavators zeroed in on mining Dash — a digital currency that was initially intended to be ASIC-safe. The D3 is presently the most effective excavator for mining Dash and offers major upper hands over different gadgets.

The D3 conveys a hash pace of 19.3 GH/s, with a power utilization pace of simply 1350W. The acknowledged effectiveness pace of the D3 is 0.07 J/MH. When contrasted with the iBeLink DM384M, which has comparable power necessities and creates just 384 MH/s, the D3 stays the more financially smart choice.

Pros Cons
Moderate cost None found
Safe to use

Dragonmint T1

bitcoin miner t1

Hash rate: 16 TH/s | Voltage: N/A

Fabricated by Halong Mining, the Dragonmint T1 is an amazingly incredible ASIC that conveys 16TH/s with a surprisingly low power draw. The T1 shoppers 0.015J/GH which, contrasted with the Bitmain Antminer S9’s power draw of 0.098J/GH, gives a huge favorable position over Bitmain-centered mining assembles.

The T1 incorporates ASICBoos innovation, which gives an extra effectiveness increase in 20% while working with the Bitcoin calculation. Quite, the T1 utilizes the DM8475 chipset, which yields more strong productivity over Bitmain’s S9 advertising.

Pros Cons
Incorporates ASICBoos innovation none found
Moderate cost

WhatsMiner M3X

whatsminer bitcoin

Hash rate: 12-13 TH/s | Voltage: 180-240V

The WhatsMiner M3X is fabricated by Pangolin Miner and gives use case-explicit usefulness to singular excavators or mining ranches that aren’t limited by high force utilization and incredibly noisy working volume.

While the M3X is certainly not an ideal alternative for at-home pastime diggers, the actual gadget conveys 12 to 13 TH/s with power utilization that ranges between 1900W to 2100W.

Driven by 28nm ASIC chip innovation, the M3X is fueled through the WhatPower P5 which, strikingly, will not sudden spike in demand for 110-120V mains voltage and requests 180-240V mains voltage to work.

Pros Cons
Easy to use Requires lots of power
Affordable

Avalon6

Avalon6 Hardware bitcoin miners

Hash rate: 3.5 TH/s | Voltage: N/A

The Avalon6 is as of now the best Bitcoin digger for home mining or leisure activity Bitcoin mining, conveying great usefulness with a low clamor profile and sensible force drawn at a reasonable value point.

While the Avalon6 gives a fundamentally lower hash rate than Bitmains Antminer S7 or S9 at 3.5 TH/s, the amazingly low stable emanation of the gadget alongside chip cluster that comprises of 80 18nm A3218 chips, the Avalon6 delivers just 55dB of noise inside 1.2 meters closeness.

The 500MHz standard frequency of the Avalon6 can be tuned through frequency control, which makes it ideal for excavators looking for Bitcoin mining equipment that works productively with complex temperature control — or overclocking openings.

Pros Cons
Easy to use none found
Easy to install

How We Picked

Before publishing this post, more facts and data about these bitcoin mining machines were gotten from further research and online reviews (both positive & negative). With the result and feedback gotten, we ranked each product according to the standard we set.

If you observe the reviews carefully, you’ll see that each hardware bitcoin miners has been carefully categorized according to our research result. However, take note that the bitcoin mining machines that didn’t meet our standards were not included in this list.

People Also Ask

How Long Does it take to mine a Bitcoin?

Notwithstanding the number of excavators, it actually requires 10 minutes to mine one Bitcoin. At 600 seconds (10 minutes), all else being equivalent it will take 72,000 GW (or 72 Terawatts) of ability to mine a Bitcoin utilizing the normal power use given by ASIC excavators.

Can you mine Bitcoin for free?

Very few individuals know that free bitcoin is available for whoever gets there first. Indeed, there are four astounding approaches to acquire bitcoins free of charge on the web. You can join buy reward programs, open a premium-bearing bitcoin account, become a member advertiser, and even get paid to mine bitcoin with no specific equipment.

How much does it cost to mine 1 Bitcoin?

The expense to mine 1 BTC is 8206.64$. Which means it’s still productive,” one excavator said. Considering the expense to dig Bitcoin for both large mining communities and individual excavators can run in the middle $5,000 and $8,500, diggers have more motivator to offer to take care of operational expenses instead of to clutch the BTC they mine.

Conclusion

With our review above, picking the best bitcoin hardware miner wouldn’t be an issue anymore. Be that as it may, ensure you check all the essential details of your preferred choice before buying.